Unit Display - Invacare Softform Premier Active 2S Manuel D'utilisation

Invacare® Softform® Premier Active 2S

5.3 Unit display

A
Task
1. Power up
2. Power down
14
Action
Push main switch of control unit.
1. Move control unit switch to off
position (See figure above).
2. Disconnect from power source.
Unit display LED
A
Unit display LED
3 audible beeps.
Unit display LED starts to flash yellow (see figure
above)
After 10 minutes the LED turns green as the system
is setup.
The green LED goes out.
1627426-A