Operating The Bed; General Safety Information; Operating The Hand Control Unit; Operating The Bed Functions Manually - Invacare Sonata Manuel D'utilisation

Invacare® Sonata

4 Operating the bed

4.1 General Safety Information

WARNING!
Risk of personal injury and damage to property.
– The bed must be placed so that the height
adjustment is not obstructed by, for example,
lifts or furniture.
– Take care that no body parts are being squeezed
between fixed parts (such as side rails, bed
ends etc) and moving parts.
– The hand control must not be used by children.
WARNING!
Risk of injury
If the bed is used by confused or restless users
or users with spasms:
– either, when the bed is equipped with a
lockable hand control, lock the hand control
functions,
– or make sure that the hand control is out of
reach for the user.

4.2 Operating the hand control unit

Move up (press left side of corresponding button)
p
q Move down (press right side of corresponding button)
Backrest adjustment
A
Thigh section adjustment
B
Sitting position adjustment
C
1. Use the buttons on the hand control to operate the
electrical functions of the bed.

4.3 Operating the bed functions manually

If the bed is configured for manual operation, it's not
equipped with a hand control unit, but with a crank,
positioned at the foot end of the bed.
14
A
B
C
The two-section bed has one crank to operate the head
section. The four-section bed has one crank to operate the
head section and one crank to operate the thigh section.
• A for lower half of the mattress support.
• B for upper half of the mattress support
UP Turn the crank handle clockwise
DOWN Turn the crank handle counterclockwise
WARNING!
– Do not use the crank if an extra weight, apart
from the user, is placed on the bed
IMPORTANT
– The handle has to be locked/secured, when the
crank is not used.
Lock/secure the crank
IMPORTANT!
Twisting or rotating the white sleeve will damage
its internal components and the locking function
will seize to work.
– Only push the white sleeve inwards without
twisting.
1.
Push the white sleeve C inwards
2. Bend the crank by the knuckle D and move it to the
right.
1574228-E