Troubleshooting - Ascaso Dream Manuel De L'utilisateur

ascaso
13.
34
manual DREAM PID_ES_EN_DE_NL_FR.indd 34 manual DREAM PID_ES_EN_DE_NL_FR.indd 34

Troubleshooting

Possible Causes
problems
The coffee is The coffee is not at the correct
not hot temperature.
Cold accessories (cup, filter
holder).
The coffee The grind you are using is too
comes out very coarse and/or the coffee has not
quickly (ground been properly tamped down.
coffee). Not enough ground coffee used.
The coffee The grind you are using is too
comes out very coarse, there is not enough
quickly (pods). coffee or it has not been properly
packed.
The coffee is not The grind you are using is too
creamy. coarse. The coffee has not been
correctly tamped down.
The coffee is old or poor quality.
The coffee The water tank is empty or
doesn't come incorrectly placed.
out or does so The grind you are using is too fine
slowly. or too tightly tamped down.
The filter and/or washer are
obstructed. Limescale in the
machine.
Insufficient pressure.
There is a lot of The coffee has not been correctly
water in the filter tamped down. There is not
after making the enough coffee in the filter.
coffee.
What to do?
Wait for the on/off pilot light
to go off. See general tips.
Point 3. Increase temperature
by PID system.
Use espresso coffee.
Experiment with tamping the
coffee down more or less. Fill
to the brim of the filter.
Regulate the pressure using
the expansion valve
10
next to the group . This
8
should be carried out by a
qualified technician.
Use espresso coffee.
Experiment with tamping the
coffee down more or less.
Change your coffee.
Use freshly ground coffee.
Fill or correctly replace the
tank. Use espresso coffee.
Experiment with the way you
tamp the coffee down. Clean
filter and/or washer.
Clean the machine. See
point 6.
Increase the working
pressure using the expansion
valve next to the coffee
10
group 8 . This process
should be carried out by a
qualified technician.
Tamp down correctly. See
point 3.
Add more coffee to the filter.
See point 3.
09/12/2019 11:22:37 09/12/2019 11:22:37