Wacker Neuson HI400HD D Notice D'emploi page 5

HI400HD D / HD G
Expectations This manual provides information and procedures to safely operate and main-

for
tain the above Wacker Neuson model(s). For your own safety and to reduce the
information in
risk of injury, carefully read, understand, and observe all instructions described
this manual
in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its
machines.
The information contained in this manual is based on machines manufactured

up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to Wacker Neuson

factory-installed components. Your machine may vary depending on the
requirements of your specific region.
This manual contains references to approved parts, attachments, and
Manufacturer's
approval
modifications. The following definitions apply:
Approved parts or attachments are those either manufactured or provided by

Wacker Neuson.
Approved modifications are those performed by an authorized Wacker Neu-

son service center according to written instructions published by Wacker Neu-
son.
Unapproved parts, attachments, and modifications are those that do not

meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
Serious injury hazards to the operator and persons in the work area

Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
ghi_tx001460gb_FM10.fm
5
Foreword