Inspecting The Electrical Connections; Cleaning The Machine - Wacker Neuson HI400HD D Notice D'emploi

HI400HD D / HD G
7.8

Inspecting the Electrical Connections

After disconnecting the power cord, check all electrical connections for the
following:
■ Proper connections. Be sure that all connections are complete and tight.
■ Corrosion. Clean or replace if necessary.
■ Damaged wires/connectors. Replace if necessary.
■ Proper ground.
7.9

Cleaning the Machine

■ Machine shut down
Requirements
■ Machine cool
General Clean the following areas to ensure proper operation.
cleaning
Item
Burner
Hoses, connectors,
and couplings
Trailer (if equipped)
Covers/machine
exterior
Air inlets/ouputs
ghi_tx001465gb_FM10.fm
Method/task
Remove all dirt and debris. Ensure that the air intake area is
unobstructed.
Wipe clean with cloth.
Clean with compressed air: 50 psi maximum.
Wipe clean with cloth.
Remove all dirt and debris. Ensure that the air intake area is
unobstructed.
77
Maintenance