Lifting And Transporting - Wacker Neuson HI400HD D Notice D'emploi

Lifting and Transporting

3 Lifting and Transporting
■ Transport vehicle capable of carrying 1000 lbs (454 kg)
Requirements
■ Crane or lift capable of carrying 1000 lbs (454 kg)
Background NOTICE: These machines are NOT designed to be towed with any vehicle.
WARNING
Crushing hazard.
► Only qualified riggers should attempt aerial lifting of this machine.
Guidelines Follow the guidelines below when lifting and transporting this machine.
■ Remove all venting from the machine prior to lifting/transporting.
■ Cover all openings on the machine to avoid infiltration from road debris and dust.
■ When using an aerial lifting rig, use the designated lifting point on top of the
machine.
■ Use the designated fork pockets when transporting the machine with a fork lift.
■ Use the manual transport handle when relocating the machine within the job site.
■ When tying down the machine, route tie-down straps or chains through the
lower frame only.
NOTICE: Do not route tie-down straps or chains over the top of the machine. Doing
so will damage the machine. Use only the designated tie-down locations.
HI400HD D / HD G
26
ghi_tx001461gb_FM10.fm