Control Panel-Gas Burner (G Models) - Wacker Neuson HI400HD D Notice D'emploi

HI400HD D / HD G
4.13 Control Panel—Gas Burner (G Models)
Control panel
components
Ref.
a
b
c
d
Symbols and
meanings
Symbol
RESET
Note: The controller is only capable of running for a 24-hour period. After 24 hours,
the controller will shut down.
To restart the machine:
a. Turn the mode switch to the OFF position.
b. Disconnect the power cord from the power source.
c. Reconnect the power cord to the power source.
d. Run the machine as normal.
ghi_tx001462gb_FM10.fm
RESET
Description
Operating status indicator and
reset button (dual function)
Mode switch (on-off-on)
See topic Starting the Machine.
Remote thermostat receptacle
Burner indicator
Meaning/function
Push the button to reset the
machine when a burner fault
occurs.
On
(Remote thermostat mode)
See topic Starting the
Machine.
Power indicator
Ref. Description
e Power indicator
f Power cord
g Polarity indicator
(illuminates when polarity of
power supply is incorrect)
— —
Symbol Meaning/function
On
(Continuous heat mode)
See topic Starting the
Machine.
Remote thermostat
connection point
— —
37
Operation