Establishing The Media Connections At The M-Driveen; Mains Connection; Electric Shock - Abicor Binzel MFS-V2 Mode D'emploi

MFS-V2
6.3 Establishing the media connections at the M-Drive
Connect the following connections to one another:
1
9
8
1 Air-blast outlet
2 Air-blast inlet
3 Gas inlet
Fig. 7 Connection diagram

6.4 Mains connection

Electric shock

Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
Mains cable and mains plug are pre-mounted. For the mains voltage and the fuse protection, please refer to:
 2.3 Technical Data on page EN-4
 2.5 Nameplate on page EN-5
1 Plug in mains plug.
7
4 Welding cable connection
5 Coolant return inlet
DANGER
6
6 Coolant supply inlet
7 Coolant supply outlet
6 Putting into operation
2
3
4
5
8 Coolant return outlet
9 Cable assembly
EN - 9