Renkforce DK-9827 Notice D'emploi page 53

Programming the system for one or more users
8900 For one user; all previous program settings are reset.
8901 For several users; all previous program settings are reset.
Programming master and user codes for one user
0 4 digits, fixed
1 4 digits, fixed
2 4 digits, fixed
3 4 digits, fixed
# After entering "0" you can program the Master code
to any value. This must be 4 digits long. Press the #
key to save this.
# After entering "1" you can program user code 1 to
any value. This must be 4 digits long. Press the # key
to save this.
# After entering "2" you can program user code 2 to
any value. This must be 4 digits long. Press the # key
to save this.
# After entering "3" you can program user code 3 to
any value. This must be 4 digits long. Press the # key
to save this.
53