Adding & Replacing The Food - SURE petcare SUREFEED Microchip Pet Feeder Connect Guide D'utilisation

Adding & replacing the food
It is important to change your pet's food on a daily basis, not only to ensure your pet stays
happy and healthy, but also to keep the Feeder clean and in working order.
6
When all the lights are flashing
green you have filled the bowls
with the full portion.
5
After the zeroing light sequence, start
filling the bowls. The portion indicator
lights will illuminate to show the amount
of food in each bowl - see next page.
17
Press the open/close button ( ).
Press the zero button, before filling the bowls,
to ensure you are giving a full portion to your
pet. Remember that pressing this button will
zero both sides of the Feeder - see page 13.
1
Remove the dirty bowls and any
debris. Clean them or replace
with fresh ones.
Make sure the appropriate single
or half bowl supports are correctly
sitting on the weighing arms and
place an empty bowl on top.
4
2
3