Buttons & Lights - SURE petcare SUREFEED Microchip Pet Feeder Connect Guide D'utilisation

Buttons & lights
Buttons
There are 5 buttons on the Feeder. These can be found at the rear of the product:
Zero button - used to calibrate the Feeder and ensure
you are giving the correct amount of food - see page 17.
This button will zero both sides of the Feeder, whether
you're using a single bowl or half bowls.
When using half bowls, if you want to zero them
independently you can do this using the
Sure Petcare app.
Lid lock
Locked - this means you cannot pull
and remove the lid from the Feeder.
Unlocked - you are able to pull the lid
when it's in the open position to remove it.
13
The lid lock should remain locked at all times and only be unlocked
when you want to remove the lid for cleaning. This is so you can stop
very clever unauthorised pets from trying to remove the lid to access
the food. Be aware that this doesn't prevent the lid from opening.
Open/close button - opens and closes the
lid so you can access the bowl(s).
Add a pet button - used to add your pet's
microchip ID into the Feeder - see page 15.
Training mode button - used to activate
training mode which teaches your pet to use
the Feeder - see page 19-20.
Settings button - used to connect the
Feeder and the Hub - see page 12.