Setting - BWT A6X Notice Originale

At its first start-up, the device displays after a few seconds the message SERV, first step of the set-
ting, which uses 5 keys:
Key Name
çM Left / Menu
Down
ê
Up
é
è Right
oK
Enter
The following steps are necessary and sufficient to set the softener.
You just need to know the hardness of the raw water (concentration in lime scale), measured before
or known from the public water distribution network.
First press 3 seconds on the key M, until the message LANG appears on the display.
Message
step n°
displayed
LANG
_ :_
1
Fr
_ :_
Hour
00:00
2
MiN
15:00
TYPe/sALT
3
tAbl
VoLuMe
4
16 L

seTTiNG

• Activates the menu with a long press (5 seconds)
• Ongoing setting cancellation without record
• Down move within a list of choices
• Decrease / change of a parameter
• Up move within a list of choices
• Increase / change of a parameter
• Move from left to right digits (example: hours to minutes)
• Enter into a menu
• Setting validation
• A long press (5 seconds) triggers a manual regeneration. During
this process, a brief press forces the trigger of the next step.
Purpose
Change language if necessary
Language selection
Time setting : hours
Time setting: minutes
Specify the type of salt for some
devices
Specify the resin volume within the
softener, in liters.
Manual soFTeNer A27-A6X code P0011144 - Rev 7 - 11/04/2018
Function
How to do
Default value is French
oK
to change
to cancel
çM
to select
êé
oK
to confirm
to cancel
çM
to change
êé
to go to minutes
è
oK
to confirm
to cancel
çM
to change
êé
to go back to hours
è
oK
to confirm
to cancel
çM
to select
êé
oK
to confirm
to cancel
çM
to select
êé
oK
to confirm
to cancel
çM
27