Correction Of Spray Pattern Imperfections; Disposal Of Cleaning And Servicing Substances; Technical Data - WALTHER PILOT Mini Mode D'emploi

8.1

Correction of Spray Pattern Imperfections

The following table shows how to correct a defective spray pattern.
Spray pattern Fault
test
Swollen centre
Swollen ends
Coarse pearl effect
Unduly thin paint
layer in centre
Split centre
Split centre
9

Disposal of Cleaning and Servicing Substances

The disposal of substances used for cleaning and servicing should be in accordance
with local, national and international laws and directives.
Warning
Particular attention should be paid to the spray and cleaning media manufacturers'
instructions. Improper disposal represents a serious threat to the health of humans
and animals.
Desired Spray Pattern
Necessary adjustment
• Spray jet should be flatter
• Spray jet should be rounder
• Increase atomising air pressure
• Decrease atomising air pressure
• Increase nozzle diameter
• Reduce atomising air pressure
• Increase material pressure
• Decrease material pressure
• Increase atomising air pressure
36
10

Technical Data

Weight:
Connections:
Material connection
Air connection
Choice of nozzle sizes:
Air cap:
Pressure randes:
max. atomising pressure:
max. material pressure:
Max. operating temperature
of the spray gun:
Noise level,
measured at a distance
of ca. 1 m from spray gun:
Air consumption:
High pressure High pressure
Atomising
6-hole air cap 8-hole air cap
air
Round Flat Round
pressure
jet jet jet
1 bar 48 l/min 125 l/min 54 l/min
2 bar 70 l/min 195 l/min 90 l/min
3 bar 115 l/min 265 l/min 125 l/min
4 bar 140 l/min 330 l/min 150 l/min
5 bar 170 l/min 415 l/min 185 l/min
6 bar 220 l/min 490 l/min 220 l/min
Right to effect technical changes reserved.
295 g
G 1/4"
G 1/4"
0.3 • 0.5 • 0.8 • 1.0 • 1.2 •
1.5 • 1.8 • 2.0 • 2.2 mm ø
High pressure 6-hole air cap or
High pressure 8-hole air cap or
Medium pressure air cap
Rotary jet air cap
8 bar
8 bar
43°C
83 / 85 dB(A)
Medium pressure Rotary jet
air cap air cap
Flat Round Flat Round
jet jet jet jet
125 l/min 63 l/min 105 l/min 60 l/min 120 l/min
195 l/min 95 l/min 170 l/min 110 l/min 175 l/min
275 l/min 130 l/min 220 l/min 140 l/min 235 l/min
340 l/min 160 l/min 280 l/min 175 l/min 300 l/min
420 l/min 190 l/min 330 l/min 220 l/min 360 l/min
495 l/min 220 l/min 400 l/min 255 l/min 430 l/min
37
Flat
jet