Starting cooking
Once you have made the desired settings,
press
. Cooking begins.
[
]
NOTES:
During cooking, the following indicators are
active:
–
lights up
[
]
–
flashes
[
]
–
The selected menu selection display
flashes.
To cancel all settings and operation, press
and hold
for 3 seconds. The product
[
]
switches to program selection mode.
During cooking, the display
between the set temperature and the
remaining cooking time.
After cooking has ended, the fan continues to
run for 1 minute to cool down the product.
The value display
[
time (in seconds).
flashing.
To switch to the program selection mode
during cooling down period, press and hold
for 3 seconds.
[
]
After the cooling down period has ended, the
product switches to standby mode. A double
beep sounds 5 times.
You can remove the bowl
do not need to wait for the fan to turn off.
All indicators go off and the value display
shows "–––".
Pausing cooking
You can pause cooking e.g. if you wish to change
a setting.
Pausing cooking (pause mode): Press
When cooking is paused,
Continuing cooking: Press
[
]
[
toggles
[
1 ]
shows the countdown
]
and
are
[
]
[
]
at any time and
5 ]
[
[
[
flashes.
[
]
again.
[
]
NOTES:
The heating element and the timer are off
when cooking is paused. The fan keeps
on running in order to prolong the life
expectancy of the product.
When cooking is paused: If the bowl
removed from the cooking chamber
fan goes off as well.
When cooking is paused, following settings
]
cannot be made:
–
Keep warm
–
Menu selection
–
Delay function
Cancelling cooking
Press
during cooking.
[
]
After cooking has been cancelled, the fan
continues to run for 1 minute to cool down the
product.
Alternatively, press and hold
3 seconds to cancel all settings and
operation. The product switches to program
selection mode. The product skips the cool
down function in this case.
Keep warm
Press
during cooking to activate the
[
]
keep warm function automatically when
cooking ends.
At the beginning, temperature is set to 80 °C
]
and the time is set to 30 minutes.
Only the time can be adjusted:
Button Function (time)
Increase time
[
]
Decrease time (min. 1 minute)
.
]
[
]
After setting the keep warm time, it is not
necessary to press any button to reactivate
the keep warm function.
5 ]
[
, the
6 ]
[
for
[
]
flashes.
[
]
(max. 60 minutes)
GB/IE
is
33