Technical Data - Dentsply Sirona SpaceFile Mode D'emploi

Masquer les pouces Voir aussi pour SpaceFile:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

TEChNICal DaTa

air Motor complex aM –
Maximum rated
speed
performance
weight
coupling: hose side
operating pressure
STEP-by-STEP INSTRUCTIONS FOR USE
1. Disinfection –
a) the contra-angle and air Motor can be manually or mechanically disinfected
after use with a patient. please observe the following points for manual disinfection.
b) if heavily soiled, clean first with disinfectant cloths. Disinfect using certified
surface disinfectants (ph 2.5-9) or 80% ethyl alcohol.
c) spray disinfection is recommended; note the action times of the disinfectants used.
Note: Wear Protective Gloves during these procedures!
Do not use chlorinated disinfectants as these may cause corrosion!
Do not immerse the handpiece in an ultrasonic cleaning bath
or in liquid disinfectants as this may cause irreparable damage!
2. Manual cleaning –
air Motor:
a) ensure that the speed regulating ring is set to position F or r.
b) remove the air motor from the supply hose.
c) wipe off the air motor with cellulose paper and prepare it for sterilization.
contra-angle:
d) rinse under de-mineralized water (<38ºc) with the aid of a brush.
prevent water from entering the contra-angle.
e) then, remove any liquid residues (absorbent cloth,
blow dry with compressed air) and dry completely.
Note: Doctors are requested to note the labeling information
(concentration, application time, etc.) of the cleaning
agents they use and take necessary precautions.
20,000 rpm
Up to 20 w
77 g
iso 9168, standard 4-hole
2.2 – 3 bar
32 – 43 psi
contra-angle complex its –
transmission ratio
coupling: Motor side
• Strips (accessory)
• Chucking
Maximum released motor
speed
stroke length
weight
4
2:1
iso 3964 (front end)
• SPACEFILE® Interproximal
reduction strips
• By friction
35,000 rpm
1.6 mm
70 g
Spray
for
ETHYL
surface
ALCOHOL
dis-
infection
80%

Publicité

Table des Matières
loading

Table des Matières