Steinbach BP-39WS-B Mini Mode D'emploi page 32

Masquer les pouces Voir aussi pour BP-39WS-B Mini:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 160
- Contact an authorised expert if you suspect a coolant leak.
WARNING!
Risk of injury due to inadequate qualifications!
Lack of experience or skill in handling the required tools and lack of
knowledge of regional or normative regulations for the necessary manual
work can result in serious injuries or material damage.
- Engage a qualified specialist for all work for which you are unable to
assess the risks due to inadequate personal experience.
WARNING!
Risk of electric shock!
A faulty electrical installation or a mains voltage that is too high can lead to
electric shock.
- Have the installation, initial start-up and maintenance of the heat pump
carried out by authorised specialists only.
- Only start work on the heat pump after checking all safety regulations.
- Work on the heat pump must only be performed when it is de-energised.
- Only connect the heat pump if the mains voltage from the power socket
matches the voltage indicated on the rating plate.
- Only connect the heat pump to an easily accessible power socket so that in
the event of a malfunction, you can quickly disconnect the heat pump from
the mains.
- Do not operate the heat pump if there is visible damage or the mains cable
or the mains plug is defective.
- If the mains cable of the heat pump is damaged, it must be replaced by the
manufacturer, the manufacturer's customer service or a similarly qualified
person in order to avoid hazards.
- Do not open the housing. Leave repairs to qualified specialists. Liability and
warranty claims are excluded in the event of repairs carried out on your
own, improper connection or improper operation.
- Only parts that correspond to the original device specifications may be
used for repairs. This heat pump contains electrical and mechanical parts
that are essential to protect against hazard sources.
- Do not operate the heat pump with an external timer switch or a separate
remote control system.
- Do not submerge the heat pump, the mains cable or the mains plug in
water or any other liquid.
- Never touch the mains plug with damp hands.
32

Publicité

Table des Matières
loading

Table des Matières