Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Notes For Use - Proficook PC-WKS 1190 G Mode D'emploi

replaced by the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
• This appliance is used for heating and boiling water. Never use to
heat up other fluids or foodstuffs. This can cause injury.
• Only use the appliance in a dry, indoor area. It is intended for do-
mestic use and similar areas of use such as e. g.:
- In staff kitchen areas in shops, offices and other working envi-
ronments;
- By guests in hotels, motels and other residential type environ-
ments.
It is not intended for use in farm houses or Bed & Breakfast type
environments.
• The following symbols are on the product:
CAUTION:
Do not immerse the appliance into water for cleaning. Please
follow the instructions as stipulated in the chapter "Cleaning".

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
3. Check the content for any missing parts.
4. In the event that the packaging content should be incom-
plete or if damages are noticeable, do not operate the
appliance. Return it to the dealer immediately.
NOTE:
There may be dust and production residue on the
appliance. We recommend cleaning the appliance as
described under "Cleaning".
Overview of the Components /
Scope of Delivery
1 Spout
2 Lid
3 Self-closing filler opening
4 Handle for opening the lid
5 Handle
36
PC-WKS1190G_IM
6 Water level indicator
7 On / off switch
8 Water tank lighting
9 Base

Notes for Use

Mains Lead
Completely unwind the length of mains lead that you require
from the bottom section of the base. Please ensure that the
mains lead does not become tangled up.
Connected Wattage
The total power consumption of this appliance can be up
to 2200 W. With this connected load a separate supply line
protected by a 16 A household circuit breaker is recom-
mended.
CAUTION: Overload!
• If you use extension leads, these should have a cable
cross-section of at least 1.5 mm².
• Do not use any multiple sockets, as this appliance is
too powerful.
15.08.19