Using The Control Panel; Operating Parameters; Setting The Temperature - Palazzetti ECOFIRE IDRO Manuel D'utilisation Et D'entretien

1.2 USING THE CONTROL PANEL

parameter simply use the
active alarm or error codes.

1.3 OPERATING PARAMETERS

Stove operation is determined by the Power level and Temperature parameters set by the user.
1.3.1 setting the power level
consumption.
To change the power level use the
a) Use the
b) Select submenu "1
d) Press

1.3.2 Setting the temperature

a) Use the
b)
c) Press
storage tank.
1.3.3
To change the value of ventilation of the Everspring system:
a) Use the
b) The fan speed value will blink; modify the value by pressing
•
• "Auto" = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
•
c) press the button
18
are used to scroll between the different menus that are highlighted.
button and modify the values, again using the
goes back up one level in the menu; pressing and holding the button displays any
buttons to go to the power menu
buttons to scroll the submenu
buttons to go to the temperature menu
buttons to go to the fan menu
.
(buttons (1 minimum,....5
and press
buttons
: setting this value changes the desired hot water outlet temperature.
and press ;
buttons; to set a
buttons. Pressing the
buttons.
;
;