Qualification And Training Of Personnel; Safety-Conscious Working; Safety Instructions For The Operator/User - Pentair JUNG PUMPEN SIMER Instructions De Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
You have purchased a product made by
JUNG PUMPEN and with it, therefore,
also excellent quality and service. Secure
this service by carrying out the installa-
tion works in accordance with the instruc-
tions, so that our product can perform its
task to your complete satisfaction. Please
remember that damage caused by incor-
rect installation or handling will adversely
affect the guarantee.
Therefore please adhere to the instruc-
tions in this manual!
As with all electrical devices, this product
can also fail to operate due to an inter-
ruption in the electricity supply or due
to a technical defect. If this could result
in damage, a mains-independent alarm
system must be installed. Depending on
the application, you may also wish to in-
stall an emergency power generator, or a
second system as a back-up.
SAFETY
INSTRUCTIONS
This instruction manual contains essential in-
formation that must be observed during instal-
lation, operation and servicing. It is therefore
important that the installer and the responsi-
ble technician/operator read this instruction
manual before the equipment is installed and
put into operation. The manual must always be
available at the location where the pump or the
plant is installed.
Failure to observe the safety instructions can
lead to the loss of all indemnity.
In this instruction manual, safety information is
distinctly labelled with particular symbols. Dis-
regarding this information can be dangerous.
General danger to people
Warning of electrical voltage
ATTENTION! Danger to equipment and opera-
tion
Qualification and training of
personnel
All personnel involved with the operation, ser-
vicing, inspection and installation of the equip-
ment must be suitably qualified for this work
and must have studied the instruction manual
in depth to ensure that they are sufficiently
conversant with its contents. The supervision,
competence and areas of responsibility of
the personnel must be precisely regulated by
the operator. If the personnel do not have the
necessary skills, they must be instructed and
trained accordingly.

Safety-conscious working

The safety instructions in this instruction man-
ual, the existing national regulations regarding
accident prevention, and any internal working,
operating and safety regulations must be ad-
hered to.
Safety instructions for the
operator/user
All legal regulations, local directives and safety
regulations must be adhered to.
The possibility of danger due to electrical en-
ergy must be prevented.
Leakages of dangerous (e.g. explosive, toxic,
hot) substances must be discharged such that
no danger to people or the environment occurs.
Legal regulations must be observed.
ENGLISH
7 7

Publicité

Table des Matières
loading

Table des Matières