In Case Of Trouble - Hendi Profi Line 143087 Mode D'emploi

4.7 IN CASE OF TROUBLE

• In case of any trouble with your appliance, switch
off your appliance, disconnect the power cable
from the mains socket and call the Customer
Service. Make sure that electrical connection is
not made before the repair process is completed.
• In case of any malfunction of the appliance, turn
off the LPG tube or natural gas valve and contact
the Customer Service. Do not open the gas con-
nection until repair of the appliance is completed.
• All repair operations should be performed by an
Authorised Service Centre. Any repairs to be per-
formed by persons other than Authorised Service
Centres may cause personal injury and appliance
damage. Repairs should be performed by the
Authorised Service Centre during the warranty
period. Otherwise, malfunctions that may subse-
quently occur shall not be covered by the warranty.
4.8 PACKAGING
Packaging protects the appliance against possible
EN
damage during transport. The packaging is made
of a recyclable material, which preserves raw ma-
4.9 RELOCATION, TRANSPORT AND STORAGE
• If you have to transport the appliance, place it in
its original container. Follow the handling marks
on the container.
• If the original container of the appliance is not
available, fix the moving parts (skewer, fixing le-
ver, kebab meat tray and motor body) with tape to
prevent any clearance during transport.
• Take necessary protective measures for possible
strokes against the ON/OFF knobs of the heater
4.10 FIRST CLEANING AND FIRST HEATING
• Before first operation, remove the nylon film
from your appliance and wipe inner and outer
parts with a wet cloth and then wipe dry.
• Do not use any detergent for wiping.
• Odour and smoke may temporarily occur at the
8
terials and reduces the quantity of waste. If you
want to dispose of the packaging material on your
own, please call the nearest recycling centre.
mechanism, motor body, cable outlet sleeve and
relief valve connection sleeve and other surfaces.
Do not put any load on the appliance.
• Keep the product in normal position during
transport and relocation.
• If the equipment is not used for an extended
period of time, store it indoors in dry, dust- and
damp-free conditions.
heated parts of your appliance during the first
heating.
• Odour and smoke should disappear soon. Odour
and smoke are not an indication of an incorrect
connection or defective appliance.