Gas Connections; Electrical Connection - Hendi Profi Line 143087 Mode D'emploi

8.2 GAS CONNECTIONS

Important: To connect the appliance in a suitably
ventilated environment. Make sure a permanent
supply of fresh air is ensured and there is no ac-
cumulation of un-burnt gases.
• Gas connections of the appliance must be made
by a qualified gas technician. The gas technician
should be aware of regulations and additional
conditions imposed by local power distribution
companies and must strictly observe the same.
Type of gas
G-20 20 mbar
G-20 25 mbar
G-30 30 mbar
G-30 36 mbar
G-30 50 mbar
G-31 37 mbar
EN

8.3 ELECTRICAL CONNECTION

Flexible cable
1: live (brown)
2: neutral (blue)
3: earth (green and yellow)
12
226001
Output [kW] Consumption [m
11.12
12.36
11.52
11.80
12.12
11.40
• Caution: The operating gas pressure in the ap-
pliance is max. 50 mbar. Gas leakage is likely if
gas pressure exceeds 50 mbar.
• The gas connection of the appliance must be
made by an authorised and suitably qualified
technician, in accordance with EN 203-1.
• The gas supply tubing or hose should com-
ply with the national requirement in force and
shall be periodically examined and replaced as
necessary.
/hour] Output [kW]
3
1.156
1.278
0.909
0.908
0.955
0.885
143087
Consumption [m
8,34
9,27
8,64
8,885
9,09
8,55
1 2 3
/hour]
3
0,867
0,959
0,682
0,681
0,716
0,664