Télécharger Imprimer la page

Troubleshooting; Technical Features; Electrical Connections - Hendi Profi Line 143087 Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 66
• Clean the appliance using warm water with soap
• Never use steam and water under pressure to
clean the appliance. Steam and water may en-
ter the current conducting sections, and cause
damage. The manufacturer shall not be liable
any resulting damage.
• Do not use cleaning agents such as stain remov-
ers and anti-corrosive agents that are abrasive.

7. TROUBLESHOOTING

The appliance must be repaired only by an Authorised Service Centre.
Any improper repair operations performed by unqualified persons may cause a risk to the user.
Problem
The appliance does not heat
or the burners do not operate
The motor does not work

8. TECHNICAL FEATURES

8.1 ELECTRICAL CONNECTIONS

• Electrical connections must be performed by
a suitably qualified electrician. The electrician
should be aware of regulations and additional
conditions imposed by local power distribution
companies and must strictly observe the same.
• The electrical connection of the appliance must
be performed by an authorised and suitably qual-
ified electrician.
Do not use sponges with hard surfaces.
• After each wet cleaning operation, wipe your ap-
pliance dry with a clean cloth.
• Never use chemicals or steel cleaning materials.
Wipe any dirt immediately. Long-remaining dirt
may damage the surface.
• Clean your appliance after each time Doner kebab
has been made.
Possible cause
The inlet valve connected to the inlet
of the appliance is closed
The burner is out of order
The burner gas supply valve
is out of order
The motor switch is out of order
The motor is out of order
• Voltage AC 230 V / Frequency 50 Hz
• It is mandatory to earth your appliance.
• Regularly check the power plug and power cord
for damage. If the supply cord is damaged, it
must be replaced by the manufacturer, its retail-
er or similarly qualified persons in order to avoid
a danger or injury.
Solution
Open the inlet valve
Please contact our Customer
Service Team
Check the main fuse
Turn the motor off
Unplug the appliance
Turn all switches off
Please contact our Customer
Service Team
EN
11

Publicité

loading

Ce manuel est également adapté pour:

Profi line 226001