Honeywell IAQ Probe Manuel De L'utilisateur page 60

Using the IAQ Probe Software
Working with the Graph Window
Moving the Cursor on a Graph
The cursor button lets you move between fixed setpoints on a graph. In
this mode, the cursor can only move by the intervals at which readings
were recorded.
1. Click on the cursor button.
2. Click and hold the left mouse button and move the cursor
to the desired location.
This option also enables the sample section, which allows you to select
a specific date and time to display in the viewing pane:
Click on GO and the graph will zoom in on the specified timeline.
58 IAQ Probe User Manual
511403
Honeywell
2/07