Display Icons - Honeywell IAQ Probe Manuel De L'utilisateur

Display Icons

Data Transfer:
Key:
Status bar:
Gas Level
Indicator:
Vibration:
Low and High
Alarm:
Temperature
Humidity:
Acquisition:
Status Bar:
Battery
Indicator:
511403
2/07
Indicates that the IAQ Probe has
established communication with a
computer and that data transfer is in
progress.
Tx will flash while transmitting data to the computer.
Rx will flash while receiving data from the computer.
Indicates that the display is locked on the
gas in progress. The IAQ Probe always
continues to detect other gases even
when they are not displayed. Flashes when powered
on
"noA" is displayed during initialization to
indicate that the IAQ Probe is not in
acquisition mode.
Provides a graphic display of the gas
concentration level. A full segmented bar
indicates the level is at the top end of the
range.
Indicates that vibration during an alarm is
activated.
The Alarm icon is always displayed when
an alarm is activated, LOW or HIGH will
be displayed to the right, depending on
the alarm level activated and only for the gas in
question.
Temperature and humidity levels are
displayed adjacent to this indicator.
Indicates that acquisition is in progress
and
displays the progress of data entry
into the IAQ Probe's memory.
Indicates the battery power level.
IAQ Probe User Manual
Honeywell
17