General Characteristics
IAQ Probe Features
Temperature and The sensor resembles an antenna and is flexible
Humidity Sensor: to prevent damage.
Sensor
Compartment:
Alarm Indicator: Three red LEDs flash at a frequency of 1 Hertz (once
Battery Charge
Indicator:
Display:
511403
2/07
IAQ Probe Hardware
The IAQ Probe features two gas detection sensors:
a CO
(carbon dioxide) sensor and a CO (carbon
2
monoxide) sensor.
per second) to indicate a Low Alarm and at 4 Hertz
(four times per second) to indicate a High Alarm.
The green indicator light illuminates when the
battery is being charged and goes off when charging
is complete.
The unit features a high contrast 5.7 cm x 4.8 cm
(2
/
in x 1
/
4
8
1
7
backlight for low light conditions. The backlight is
activated with the touch of any key and shuts off
automatically after 5 minutes.
IAQ Probe User Manual
Honeywell
Temperature &
Humidity Sensor
Sensor
Compartment
Alarm Indicator
Battery Charge
Indicator
Display Screen
Up/Down Arrows
Enter Key
On/Off Button
Alarm Buzzer
Mode/Esc Key
in) LCD display with an ultra-bright
13