Description Of The Parts / Supplied Parts; Unpacking The Appliance; General Use Instructions; Electrical Connection - Proficook PC-KM 1004 Mode D'emploi

Description of the Parts / Supplied
parts
Overview controls on page 3:
1 Mixing container
2 Swivelling arm
3 Lever to lift / lower the arm
4 MIXING button
5 EGG/MILK button
6 FRUIT JUICE button
7 GRINDING button
8 Control knob
9 Motor casing
10 Mixing bowl
11 Splashguard
12 Connector ring
13 Lock ring
14 Worm casing filler
15 Filler tray
16 Tamper
17 Cover for worm casing connector
18 Safety cover for blender drive
19 Removal / attachment button for safety cover
20 3 Protective discs
21 Mixing hook
22 Eggbeater
23 Kneading hook
Illustration Assembly Mixing Container on
page 4:
1 Mixing container
1a Stopper
1b Lid
1c Safety ring
1d Sealing ring
1e Knife assembly
1f Threaded coupling
Illustrations A – E on last page:
24 Worm
25 Knife
26 3 sieves (fine, medium, coarse)
27 Sausage attachment
28 2-piece "kebbe" attachment
29 Adaptor
30 Cookie attachment
74
31 Cookie rail
32 4 pasta attachments (different pasta shapes)

Unpacking the appliance

1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic
film, filler material, cable ties and box packag-
ing.
3. Check that all parts are in the box.
NOTE:
Dust or production residues may still be found on
the appliance. We recommend that you clean the
appliance as described under "Cleaning".

General Use Instructions

Electrical Connection

Ensure that your mains power corresponds with
the specifications on the type label.

Functionality

• The appliance is equipped with safety switches.
Operation is only possible
- with safety cover (18) attached or
- with attached mixing container and
- if the swivelling arm is audibly locked down
in place.
• The appliance is operated either with the
continuously variable control knob or with the
standard programme buttons.
• With the control knob you can set the speed
continuously variable. Always start with a low
speed. Increase the speed slowly. The control
knob is without function when using a standard
programme.
• The standard programmes have a preset
speed setting. The standard programmes are
without function when you started the appliance
with the control knob. As long as one standard
programme is active no further standard pro-
gramme can be selected.