Installing The Optional Wall Storage Bracket - Stryker 6253 Manuel D'utilisation Et D'entretien

English

INSTALLING THE OPTIONAL WALL STORAGE BRACKET

To install the optional wall storage bracket:
1. Use the bracket as a template to mark the location of the mounting holes at the area where the wall brackets will
be installed. Consider the dimensions of the chair when selecting and marking the location. The approximate
height of the bracket from the floor should be 60 inches.
2. Using fasteners (not supplied) appropriate for the wall type, install the bracket by using at least four of the
mounting holes.
3. Hang the chair from the bracket using the upper control handle.
Return To Table of Contents
1-26
Operation Guide
Figure 36 - Storage Bracket Dimensions
Figure 37 - Chair stored on the bracket
6253-001-166 REV C www.stryker.com