Transferring The Passenger To The Stryker Evacuation Chair - Stryker 6253 Manuel D'utilisation Et D'entretien

TRANSFERRING THE PASSENGER TO THE STRYKER EVACUATION CHAIR

To transfer the passenger to the chair:
1. Place the chair beside the passenger.
2. Apply the wheel locks to prevent the chair from moving.
3. Open the restraint straps.
4. Extend the upper control handle.
5. Transfer the passenger to the chair using accepted EMS procedures.
6. Use all the restraints to secure the passenger on the chair
7. Disengage the wheel locks before transporting.
WARNING
The Stryker Evacuation Chair is not recommended for use with suspected cervical, spinal, or fracture injuries.
www.stryker.com
Operation Guide
(page 1-14).
6253-001-166 REV C
Return To Table of Contents
1-13
English