Stryker 6253 Manuel D'utilisation Et D'entretien page 17

USING RESTRAINT STRAPS - CONTINUED
To attach the chest straps in the cross-chest configuration:
1. Wrap each strap around the chair frame, insert the end through
the loop on the end of the strap and pull it tight.
2. Pull the strap across the passenger's chest, lengthening the
strap as necessary.
3. Buckle the strap.
4. Pull the loose end of the strap to tighten it securely around
the passenger.
5. Repeat for the second strap and the lap belt.
Figure 4 - Insert the end through the loop
Figure 5 - Pull the strap tight
www.stryker.com
Operation Guide
Figure 6 - Lengthen strap as necessary
6253-001-166 REV C
Figure 7 - Buckle strap
Figure 8 - Tighten strap securely
Return To Table of Contents
English
1-15