Unfolding The Chair; Folding The Chair - Stryker 6253 Manuel D'utilisation Et D'entretien

English

UNFOLDING THE CHAIR

To unfold the chair:
1. Stand behind the chair.
2. Apply the wheel locks (if desired).
3. Pull the backrest and the extension handle apart. The lock mechanism will automatically engage when the chair
is completely unfolded.
4. Verify the lock is engaged by pulling up on the seat. If the lock is properly engaged, the chair will not fold.
WARNING
An unlocked chair can fold during use, causing injury to the passenger or operator. Always make sure the chair is locked
in the unfolded position before use.

FOLDING THE CHAIR

To fold the chair:
1. Apply the wheel locks (if desired). Buckle the restraint straps and fold them neatly to prevent them from interfering
with proper folding of the chair. Secure the head support strap behind the chair frame.
2. Stand at the side of the chair.
3. Pull up on the red lock bar at the rear of the chair.
4. Tip the chair forward.
5. Fold the seat up to the backrest until the front legs lock in the clips on the bottom of the seat tube.
Note: Rotate the front casters so they do not interfere with folding the chair.
Return To Table of Contents
1-12
Operation Guide
RED FOLD
LOCK BAR
Figure 1- Unfolding/Folding the Chair
6253-001-166 REV C www.stryker.com