Fitting And Cleaning The Corrugated Filter; Installing And Cleaning Foam Sleeve Filter; Maintenance; Troubleshooting - EWT AquaVac EXCELL 20S Mode D'emploi

FITTING AND CLEANING ThE CORRUGATED FILTER

Fitting the corrugated filter
First check that you have unplugged the Aquavac (Fig. 1).
Lift off the motor unit and turn it over.
Push the corrugated filter over the float cage and carefully push it downwards (Fig. 2).
Put the retaining ring on the corrugated filter and using the grip rotate it firmly clockwise (Fig. 3).
Removing and cleaning the corrugated filter
Undo and remove the filter retaining ring by turning the grip anti-clockwise (Fig. 3).
Lift off the corrugated filter. (Fig. 4)
Clean the corrugated filter by tapping it and brushing it. To avoid spreading dust this is best done out of doors.
INSTALLING & CLEANING FOAM SLEEVE FILTER
Installing Foam Sleeve Filter
1. Verify that the power cord is disconnected from the outlet. (fig.1)
2. Remove power head and place in upside down position. Follow instructions to remove cloth filter.
3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is covered. (fig.2 & 3)
4. Replace the power head on to the container.
Cleaning Foam Sleeve Filter
1. With the removed power head in the upside down position, carefully remove foam sleeve filter. (fig. 4)
2. Use a mild soap and water solution to wash foam sleeve filter and rinse with clean water. (fig. 5)
3. Allow filter to air dry before installing and using again.

MAINTENANCE

Make sure that the appliance is not plugged into the power mains.
Remove the suction hose (4) (B1) from the tank.
Loosen the clamps (B2) and separate the upper section from the tank (B3).
Remove all the dirt and residue from the tank and the hose.
Clean the foam plastic filter (9) (B1) by washing it with a mild detergent.
Check the hoses and connections and check the power cord for any damage.
When the foam plastic filter (9) (B1) is removed, check the float (12) (B1).
To do this, take the upper section by the handle and tip it carefully so that the filter basket is facing upwards. The float should
move freely up and down (B14).
36

TROUBLEShOOTING

Problem Possible Causes
The appliance doesn't work. 1) No power
2) Functional fault in the power
cord, switch, or motor.
3) Tank is full of liquid
Dust is escaping from the motor 1) The dust bag is missing or
cover damaged
Low suction 1) Dust bag is full
power and high Suction nozzle, hose, or tank
motor speed / inlet is plugged.
vibrations

REPAIRS

Only use accessories and spare parts recommended by the manufacturer. If the appliance should fail in spite of our quality
control and your maintenance, then have it repaired by an authorized electrician only.

ENVIRONMENTAL PROTECTION

The packaging of your new wet/dry vacuum cleaner has a green dot on it.
Please dispose of it as recycled paper or by using the „Dual System". The vacuum cleaner bags are made of environmentally
safe, unbleached paper materials. They can be disposed of with the regular household waste. Old appliances should be dispo-
sed of professionally. Ask your city or municipal administration.
The plastic elements of the wet/dry vacuum cleaner are identified with material labels in accordance with DIN 7728. That way,
valuable raw materials can be recycled.
IMPORTANT:
RECYCLING ELECTRICAL AND ELECTRONIC EQUIPMENT
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) this ap-
pliance carries a symbol consisting of a crossed out wheelie bin to indicates that it should not be disposed of with
household rubbish.
Take it for disposal at a collection, disposal or recycling centre for old electrical and electronic equipment (the local authority
will advise of the nearest location) or return it to the dealer who sold it to you. Please note: returning it to the dealer does not
entitle you to any replacement or refund. In this way you will be making a small personal contribution to protecting the envi-
ronment, conserving natural resources and promoting the health of your fellow human beings

SPARE FILTER

EXCELL 20S
Paper dust bag, 20 litres
•
45120271
Paper dust bag, 30 litres
45120272
Corrugated filter
•
45120276
Fabric filter bag
•
with rubber retainer
45120846
Foam filter
•
Standard, 45120823
Subject to technical change without prior notice.
Corrective Action
1) Check the power supply
2) Have the damaged part checked by qua- lified
personnel or replace it.
3) Empty the tank
1) Put in a dust bag od replace it
1) Replace the dust bag
Check the suc-obstructions
EXCELL 30P
•
•
•
•
GB
37