Installing And Cleaning Reusable Cloth Filter - EWT CS 3 COMFORT Mode D'emploi

INSTALLING AND CLEANING
1
Installing Reusable Cloth Filter
1. Verify that the power cable is disconnected from the outlet (Fig.1).
2. Remove power head and place in upside down position (Fig.2).
3. Slide reusable cloth filter down over the filter cage making sure the whole cage is covered (Fig.3).
4. Replace the power head on to the container.
Removing and Cleaning Reusable Cloth Filter
1. With the removed power head in the upside down position, carefully remove the reusable cloth filter
from the filter cage. (Fig. 4) Clean the filter by gently tapping or brushing dirt off.
Cleaning should not be done indoors in living areas.
2. Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water. (Fig. 5)
3. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.
REUSABLE CLOTH FILTER
2 3 4
40
5