Installing & Cleaning Reusable Cloth Filter - EWT CS 3 Mode D'emploi

INSTALLING & CLEANING REUSABLE
CLOTH FILTER
1 2 3 4
5
Installing Reusable Cloth Filter
1. Verify that the power cord is disconnected from the outlet (Fig.1).
2. Remove power head and place in upside down position (Fig.2).
3. Slide reusable cloth filter down over the filter cage making sure the whole cage is covered (Fig. 3).
4. Replace the power head on to the container.
Removing and Cleaning Reusable Cloth Filter
1. With the removed power head in the upside down position.
2. Carefully remove the reusable cloth filter from the filter cage (Fig. 4) .Clean the filter by gently tapping
or brushing dirt off. Cleaning should not be done indoors in living areas.
3. Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water (Fig. 5).
4. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.
39