Control Panel - Pelgrim GVW546ONY Notice D'utilisation

Control panel

1 On/Off button
2 Programme selection buttons
3 Delay start button
4 Indicator lights
5 Function buttons
Salt
Multitab
End
Function buttons
The following functions can be set using
these buttons:
• adjustment of the water softener level,
• cancel a washing programme or a delay
start in progress,
• activate/deactivate the multitab function,
• activate/deactivate the rinse aid dispenser
when multitab function is active,
• activate/deactivate the audible signals.
Setting mode
Press the on/off button; if ALL programme
button lights come on, the appliance is in
setting mode.
5
Indicator lights
Comes on when the special salt has run out.
Indicates the activation/deactivation of the multitab function. (Re-
fer to 'Multitab function').
Comes on when a washing programme has ended. It also has
added functions of visual signalling as:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispenser (ONLY with
multitab function active),
– activation/deactivation of the audible signals,
– intervention of an alarm due to the malfunction of the machine.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
the appliance MUST be in setting mode.
Press the on/off button; if a programme but-
ton light comes on, the last performed or se-
lected programme is still set. In this case, to
return to setting mode, the programme has
to be cancelled.
signals,
69