Unloading The Dishwasher; Washing Programmes - Pelgrim GVW546ONY Notice D'utilisation

Cancel a delay start or a washing
programme in progress
• Simultaneously press and hold the two
function buttons B and C until all the pro-
gramme lights come on.
• Cancelling a delay start will also cancel the
washing programme. You have to select
the washing programme again.
• If a new washing programme is to be se-
lected, check that there is detergent in the
detergent dispenser.
End of the washing programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme.

Unloading the dishwasher

• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
• Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless

Washing programmes

Washing programmes
Programme Degree of soil
Heavy soil
Any
1)
Light soil
Normal or light
2)
soil
1. Open the dishwasher door.
– The End indicator light is on.
– The indicator light of the programme
2. Switch of the dishwasher.
3. Leave the dishwasher door ajar for a few
minutes before removing the dishes; in
this way they will be cooler and the drying
will be improved.
steel will eventually become cooler than
the dishes.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.
Type of load
Crockery, cutlery,
pots and pans
Crockery, cutlery,
pots and pans
Crockery and cutlery
Crockery and cutlery
just ended remains on.
Programme description
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Main wash up to 55°C
1 intermediate rinse
Final rinse
Main wash up to 60°C
Final rinse
79