Control Panel - Pelgrim GVW567RVS Notice D'utilisation

72
If you install the appliance higher up with a
furniture door mounted flush, the optical sig-
nal can no longer be seen.
Optical signal
Red light Indicates the running of a wash-
fixed ing programme. Comes on
when the programme starts.
Goes off once the programme
has ended.

Control panel

1 On/Off button
2 Programme selection buttons
3 Delay start button
4 Indicator lights
5 Function buttons
Salt
Rinse aid
Multitab
End
Function buttons
The following functions can be set using
these buttons:
• adjustment of the water softener level,
Red light
flashing
Indicator lights
Comes on when the special salt has run out.
Comes on when the rinse aid has run out.
Indicates the activation/deactivation of the multi-
tab function. (Refer to 'Multitab function').
Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispens-
er (ONLY with multitab function active),
– activation/deactivation of the audible signals,
– intervention of an alarm due to the malfunction
of the machine.
• cancel a washing programme or a delay
start in progress,
• activate/deactivate the Multitab function,
• activate/deactivate the rinse aid dispenser
when Multitab function is active,
Optical signal
Indicates a malfunction of the
appliance.