Consumption Values; Care And Cleaning - Pelgrim GVW546ONY Notice D'utilisation

80
Programme Degree of soil
Normal soil
3)
1) During the Auto washing programme the level of soiling on the dishes is determined by how cloudy
the water is. The programme duration, water and energy consumption levels can vary; this depends
upon whether the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The
temperature of the water is automatically adjusted between 45°C and 70°C.
2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet
the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.

Consumption values

Programme
The consumption values are intended as
a guide and depend on the pressure and
the temperature of the water and also by

Care and cleaning

Cleaning the filters
The filters must be checked and cleaned
from time to time. Dirty filters will degrade the
washing result.
Warning! Before cleaning the filters
ensure that the machine is switched off.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a
coarse filter ( A ), a microfilter ( B ) and a
flat filter. Unlock the filter system using the
handle on the microfilter.
Type of load
Crockery and cutlery
Duration (in minutes)
80 - 90
80 - 125
45 - 55
30
160 - 170
Programme description
Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Energy (in kWh)
1,5 - 1,7
0,8 - 1,3
0,8 - 0,9
0,8
0,8 - 0,9
the variations of the power supply and
the amount of dishes.
3. Turn the handle about 1/4 a turn anti-
clockwise and remove the filter system
4. Take hold of the coarse filter ( A ) by the
handle with the hole and remove from the
microfilter ( B ).
5. Clean all filters thoroughly under running
water.
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
Water (in litres)
18 - 20
10 - 19
10 - 11
8
12 - 13