Control Panel - Pelgrim GVW5820NY Mode D'emploi

Rinse aid dispenser
5
Rating plate
6
Filters
7

Control panel

The controls are on the top on the con-
trol panel. To operate with the controls,
keep the appliance door ajar.
1
On/off button
1
Programme buttons
2
Multitab button
3
Delay start button
4
Indicators
5
Function buttons
6
3h It comes on when you set three hours for the delay start.
6h It comes on when you set six hours for the delay start.
9h It comes on when you set nine hours for the delay start.
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.
1)
End indicator. It comes on when:
• The washing programme is completed.
• You adjust the level of the water softener.
• You activate or deactivate the rinse aid dispenser (only with the multitab func-
tion on).
• There is a malfunction of the appliance.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
8
9
2
70° 65° 60°
Cancel
A B C
6
Indicators
matically deactivates the appliance. This
helps to decrease energy consumption.
Programme buttons
Press one of these buttons to set a wash-
ing programme. The related indicator
comes on. Refer to 'Washing programmes'.
Lower spray arm
Upper spray arm
5
3 4
3 h
50°
6 h
9 h
23
1)