Control Panel - Pelgrim GVW5840NY Notice D'utilisation

Rinse aid dispenser
5
Rating plate
6
Filters
7
Lower spray arm
8
Upper spray arm
9
Visual signal
• When the washing programme starts, a
red visual signal shows on the floor below
the appliance door. This red signal stays
on until the washing programme is com-
pleted.

Control panel

The controls are on the top on the con-
trol panel. To operate with the controls,
keep the appliance door ajar.
1
On/off button
1
Display
2
Delay button
3
Programme buttons
4
Indicators
5
Function buttons
6
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
1)
er.
Multitab indicator. It comes on when you activate the function.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
2
3
Auto
Cancel Multitab
A
Indicators
• When the washing programme is com-
pleted , a green visual signal shows on
the floor below the appliance door.
• When the appliance has a malfunction, a
red visual signal flashes on the floor be-
low the appliance door.
If the appliance is installed in height,
with a flush kitchen furniture door, the
visual signal does not show.
4
50°
70° 60°
45°
70°
Auto
B C D E
6
matically deactivates the appliance. This
helps to decrease energy consumption.
Display
The display shows:
23
5
1)