Filling The Water Tank - Dirt Devil Aqua clean Mode D'emploi

02_DD302_gb.book Seite 44 Freitag, 17. April 2015 1:44 01

3 Filling the water tank

3 Filling the water tank
4
5
6
44
ATTENTION:
First, pull the plug from the mains socket. Otherwise, the
appliance may run without water and become damaged.
1. Press the two release catches and remove the water
tank from its console (Fig. 4).
2. Open the tank stopper (Fig. 5).
3. Fill the water tank with clear, cold tap water (Fig. 6).
WARNING:
Risk of injury! Do not place any additives, such as deter-
gent, alcohol, perfumes or chemicals, in the water tank.
These make the use of the appliance unsafe.
4. Close the tank stopper (Fig. 5).
5. Firmly push the water tank back into the console
(Fig. 4).
6. Check that it is firmly in place.