Workplace; Important; Getting Started; Power Levels - Steba IK 55 Mode D'emploi

∙ Use a damp cloth and some detergent for cleaning.
∙ Do not use any abrasive milk, polishing wool or solvent for
cleaning.
∙ Use vacuum cleaner to suck up dirt from the air intake and ex-
haust vent.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable, non-metallic and a heat resi-
sting surface. It is important that no inflammable items are near
to the device. Do not place the device on the edge of the table so
that it cannot be touched by children or fall down when touched.

Getting started

- Place the induction-appropriate cookware onto the device.
- Plug in the device to an earthed socket, a signal can be heard and all LED's light up
shortly. The device is in stand-by mode.

Power Levels

∙ Press the On/Off
∙ Press the menu button
∙ Note: If no or inappropriate pot is recognised, E1 is flashing in the display, a signal
can be heard and the device turns into stand-by mode.
∙ The device starts with a default level 1, this corresponds to 200W.
∙ The power level can be changed with the control dial from 0 to 10. Each level cor-
responds to a performance leap of 200W.
∙ The device stops working and turns automatically into stand-by mode after 5 sec-
onds if the level 0 is chosen.
∙ Cooking with power levels is recommended for cooking large amounts of food or
soups.
16
button. The display shows - - -
. The LED for the power levels is shining.