Steba IK 55 Mode D'emploi page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Risk of electronic shock! Do not put any sharp objects into
the ventilation slots. Do not use the device if there are cracks in
the glass plate.
∙ Never place empty pots, cutlery or other metallic objects onto
the device. Those objects will get hot! Do not heat cans, they
can explode.
∙ Do not place a sheet of paper or metal foil between the pot or
the pan and the device.
∙ Do not load the glass surface with more than 8kg.
In order to protect the electronic parts, the ventilation
runs for a couple of minutes after the device has been
turned off.
The glass surface can have a residual heat after cook-
ing.
∙ Do not use the device if unsupervised. Oil and fat can
catch fire if they get too hot. In case of grease fire unplug
and never extinguish with water! Cover the pot with a lid, plate,
or similar.
∙ Do not place near objects which are affected by magnet. (e.g.
automatic-banking cards).
Cleaning
Attention! Pull the plug before cleaning and allow
the device to cool down.
∙ Never immerse the unit into water.
∙ Hygiene: Please always clean the device to avoid bacteria and
mold formation.
∙ Pay attention that no liquids can get into the device through
the air intakes.
∙ A discoloration or storing can be caused if pots are used which
are not clean at the bottom.
15

Publicité

Table des Matières
loading

Table des Matières