Workplace; Important; Getting Started - Steba KF 15 Mode D'emploi

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a
even, stable, non-metallic and a heat resisting surface. It is im-
portant that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.

Getting started

∙ The device is no built-in device.
∙ Before initial use, the device must be heated up once without pans. To do this, con-
nect the mains plug and set the switch to level 5. The control lamp lights up. Heat
up the plate for about 5 minutes.
∙ Due to production residues, there may be a slight development of smoke. You
should therefore ensure adequate room ventilation.
∙ The plate heats up until the set temperature is reached. The control lamp lights up,
after reaching the temperature the lamp starts to clock.
∙ Settings:
o 0 – 2: warming
o 3 – 4: light cooking
o 5: cooking
∙ Use the residual heat of the heating plate for further cooking and set the device
to "0".
∙
Never leave empty pots or pans on the hotplate.
∙ Once you have finished cooking, set the switch to "0" and pull the power plug.
11