Workplace; Important - Steba HK 30 Mode D'emploi

Cleaning
∙ Attention! Pull the plug before cleaning and allow
the device to cool down.
∙ Never immerse the unit into water.
∙ Hygiene: Please always clean the device to avoid bacte-
ria and mold formation.
∙ Pay attention that no liquids can get into the device through
the air intakes.
∙ A discoloration or storing can be caused if pots are used which
are not clean at the bottom.
∙ Use a damp cloth and some detergent for cleaning.
∙ Do not use any abrasive milk, polishing wool or solvent for
cleaning.
∙ Use vacuum cleaner to suck up dirt from the air intake and ex-
haust vent.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a
even, stable, non-metallic and a heat resisting surface. It is im-
portant that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
13