Lateral And Bennett Movement; Protrusion - Ivoclar Vivadent Stratos 100 Mode D'emploi

If the centric rubber bands (4.2) are removed, the two frames can
be separated.
5.2

Lateral and Bennett movement

5.2.1 Lateral and Bennett movement
The lateral movements can be simulated when the centric fixation
(4.1) is open, according to the schematic below.
To perform this movement, press with your thumb unilaterally on
the joint of the corresponding side.
By loosening the B knurled screw (3.2) the Bennett insert (3.1)
can be removed.
5.3

Protrusion

5.3.1 Protrusive movements can be simulated if the centric
fixation (4.1) is open, according to the schematic below.
4.3
4.2
To effect this movement, press with your thumb bilaterally on the
joint of the corresponding side.
3.1
3.2
11