Starting Up; User Instruction - Erreka IZAR Manuel De L'installateur

Case B: operator with limit switches (IZ1C - IZ4C - IZ4DC)
1 Motor-reducer Vdc connection
2 Motor-reducer Vdc connection
3 A operation limit switch connection
4 Common limit switch connection
5 B operation limit switch connection
O
Ensure that the limit switches are
connected correctly. If they are not, the
motor will continue to operate until wheel
A or B reaches the stopper, thus breaking
the mechanism.
5

STARTING UP

Settings for the facility to fulfil safety
requirements
 The torque regulator of the control panel must
be set to respect the values indicated in
Standard EN 12453:2000. All measurements
must be made in line with the method
described in Standard EN 12445:2000.
UNPACKING AND INSTALLATION

Before making any electrical connections,
check the control panel instructions manual.
1 Connect the motor and the limit switches to the
control panel.

We recommend using independent cable ducts
for the motor and the limit switch connections.
2 Connect the control panel to the electricity supply.

Before carrying out any door movement,
ensure there is no person or object in the radius
of action of the
mechanisms.
3 Using the control panel controls, check the motor
connections are correct (rotation direction).

If the rotation direction is not correct,
interchange cables 1 and 2 in the control panel.
O
4 Very important: Using the control panel
controls, check the limit switch connections are
correct (opening and closing operations).

If they are not, interchange cables 3 and 5 in the
control panel.
5 Adjust the limit switches by turning the wheels A and
B.

It is necessary to remove the guide (6) in order for
the wheels to turn.

User instruction

1 Instruct the user with regards to the use and
maintenance of the installation and provide him/her
with the user guide.
2 Signpost the door,
automatically and indicating how to operate it
manually. Where appropriate,
operation is using the remote control.
door and the drive
showing that it opens
indicate that
IZAR chain transmission operator
29