Table des Matières
Publicité
3.
CALCULATION OF THE REAL FRONT AXLE LOAD T
(If with the front mounted implement (G
has to be increased to the weight of the minimum ballasting at the front!)
Record the calculated real front axle load and the permissible front axle load of the tractor into the table.
4.
CALCULATION OF THE REAL TOTAL WEIGHT G
(If with the rear mounted implement (G
has to be increased to at least the weight of the minimum ballasting at the rear!)
Record the calculated real and the permissible total weight given in the instruction handbook for the tractor into the table.
5.
CALCULATION OF THE REAL REAR AXLE LOAD T
Record the calculated real and the permissible rear axle load given in the instruction handbook for the tractor into the table.
6.
TYRE LOAD CARRYING CAPACITY
Record double the value (two tyres) of the permissible load carrying capacity into the table (see for instance documentation provided by the tyre
manufacturer).
Table
Real value according to
Minimum ballasting
front/rear
Total weight
Front axle load
Rear axle load
The minimum ballasting has to be attached to the tractor either in form of a mounted
implement or ballasting weight!
The calculated values must be less or equal (<) the permissible values!
0000-GB ZUSINFO / BA-EL ALLG.
Combination of tractor and mounted implement
) the required minimum front ballasting (G
V
) the required minimum rear ballasting (G
H
calculation
Important! Additional information
V tat
) cannot be reached, the weight of the front mounted implement
V min
tat
) cannot be reached, the weight of the rear mounted implements
H min
H tat
Permissible value
according to instruc-
tion handbook
- Z.46 -
Double permissible tyre
load carrying capacity (two
tyres)
GB
Publicité
Table des Matières
