Heat-Up Diagram; Country-Specific Approvals And Certifications; Extreme Operating And Fault Conditions; Energy Consumption Data - Stiebel Eltron ESH 10 U-P Plus Utilisation Et Installation

INSTALLATION
Specification

14.3 Heat-up diagram

The heat-up period depends on the degree of scaling and residual
heat. For the heat-up time for a cold water supply at 10 °C and a
maximum temperature setting, see the diagram.
25
20
15
10
5
0
35 40 45 50 55
x Temperature in °C
y Duration in min
Example:
Temperature setting = 65 °C
Heat-up time = approx. 18 minutes

14.4 Country-specific approvals and certifications

See the type plate for test symbols.

14.5 Extreme operating and fault conditions

In the case of faults, a peak temperature up to 105 °C may briefly
occur in the system.

14.6 Energy consumption data

Product datasheet: Conventional water heaters to regulation (EU) no. 812/2013 and 814/2013
Manufacturer
Load profile
Energy efficiency class
Energy conversion efficiency
Annual power consumption
Default temperature setting
Sound power level
Daily power consumption
20 | ESH 10 U-P Plus | ESH 10 O-P Plus
60 65 70 75 80 85
ESH 10 U-P Plus
STIEBEL ELTRON
%
kWh
°C
dB(A)
kWh
ESH 10 O-P Plus
201397
STIEBEL ELTRON
XXS
A
36
507
55
15
2.370
www.stiebel-eltron.com
201398
XXS
A
37
498
55
15
2.320