2. PARTS
1. ice Chute
2. Housing
3. Switch
4. Ice Container (3 liter capacity)
3. USE
1. Place the Ice Crusher (clear bowl) packed with the unit under the bottom opening of the ice crusher.
Plug the unit in and set the ON/OFF power switch to the ON position. NOTE: Ice crusher will not
operate unless Ice Container is secured into position.
2. To begin crushing ice, drop cubes into feeder chute opening on
top of the unit. Blades of crusher unit are self feeding. DO NOT ATTEMPT TO PUSH CUBES INTO
BLADES WITH HAND OR INSTRUMENT.
3. If a large cube should become lodged in the crushing unit so that blades cannot reach it, set power
switch to the OFF position and unplug unit from outlet.
Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug unit
back into outlet, set the power switch to the ON position, and resume feeding cubes through the
feeder chute.
4. HOW TO CARE FOR YOUR ICE CRUSHER
1. UNPLUG POWER CORD FORM OUTLET.
2. Pour hot water through top feeder chute to rinse out after each use.
3. Wipe outside of ice crusher with a clean damp cloth.
4. NEVER IMMERSE UNIT IN WATER.
5.
RECIPES
** Please note that the drink recipes are all based on a 10- to 11-ounce glass capacity
SIMPLE SYRUP
This liquid sweetener can be found in several of the following recipes . It will keep covered in the
refrigerator for 2 weeks .
Makes 3 1/2 cups
1
2
3
4
19