Operation; Setting The Time - Conrad BASETech 1517164 Mode D'emploi

9. Operation

Press and hold the "SET" button for 3 seconds to enter the "Time and function setting" menu. Press
the "SELECT" button to toggle between "tI" for the clock time setting and "St" for the function setting.
Press "SET" to confirm your selection.
a) Setting the time
Press and hold the "SET" button for 3 seconds to set the time. Select "tI" for the clock time setting and
confirm your selection as described above.
1 In the first step the current year in the order 2010 to 2050 is set. To add a year, press the " "
button. To reduce the number of years press the " " button. Confirm your setting with the "SE-
LECT" button.
Year
2 Next the month is adjusted. Use the " " button as described in step 1, and the " " button to
scroll through the menu.
Month
3 Weekday, hours and minutes are now adjusted. You can set and select these as described in
step 1.
Month day
• Once the year, month, weekday and clock time are set, the year setting restarts. If you want to
confirm your selection, press the "OK" button. If you want to change your settings, repeat step
1 to 3.
30